Description
- 6,000 lbs. Capacity
- Portable
- Low Profile Design
- Rigid Base Construction
- Built in Drive-over Ramps
- Single Point Lock Release
- Two-Stage Telescoping Swing Arms
- Locking Arm Restraints
- Lifting Height: 5′ 11 2/3″ (71 2/3″)
- 110volt Electric Operation (30 AMP BREAKER REQUIRED)
- Free 8 Piece Truck Adapter Set
- Includes Double Screw-up Adapters
- 1 Year Manufacturer Warranty for Parts
- 2 Years Manufacturer Warranty on Lifting Structure
The Atlas® PSP-6000 portable single post lift is the perfect choice for the commercial service shop or the Mr. Homeowner who does not want to tie up a bay space with a permanently mounted above ground lift. This portable vehicle lift allows the operator to walk under the vehicle or move around the vehicle to perform wheel service. When the Atlas PSP-6000 is not in use, it may be rolled out of the way into a corner. The PSP-6000 also has a built-in ramp allowing vehicles to drive over it, further maximizing garage space.
The Portable Single Post Lift rolls easily on a level concrete surface and can be used either inside or outside of your garage. The column fits under a 9 foot (108 inch) ceiling and allows the operator to raise most vehicles high enough to access many parts of the vehicle that would not be accessible with a mid-rise lift.
The Atlas® PSP-6000 column is equipped with the chain break mechanism that automatically locks the carriage into place in the unlikely event of a chain failure.
Atlas® PSP-6000 Single Post Lift Specifications:
- Capacity: 6,000 LB.
- Overall Height: 102 3/4″ (8′ 6 3/4″)
- Max. Lifting Height (Without Truck Adapters): 71 2/3″ (5′ 11 2/3″)
- Max. Clearance: 68″ (5′ 8″)
- Minimum Height: 5″
- Overall Maximum Dimensions: L: 111 1/2″ x W: 96″ x H: 102 3/4″
- Column Size: 10 1/2″ x 12 1/2″
- Distance Between Lifting Pads (Column Side to Offside): 39 1/2″ to 81″
- Distance Between Lifting Pads (Column Side to Column Side): 53″ to 73″
- Distance Between Lifting Pads (Offside Side to Offside): 54 1/3″ to 91 1/2″
- Motor/Electric Requirement: 110volt, 30 amp breaker required
- Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
- Shipping Weight: 1,900 lbs.
- Adapter Heights: 4 Each 2.75″, 6”
- Arm Hole/Adapter Peg Size: 2”